Category | Description | Cena/Цена/Price, EUR/tn (Sloka) |
OA
Scrap metal from thick metal structures. At least 8 mm thick |
Structural steel scrap, including beams, U-seStructural steel scrap, including beams, U-section profiles, shaped profiles, scrap from pipe production.
Pipes with diameter exceeding 300 mm must be horizontally cut. Maximum dimensions of a piece: 1500×500×500 mm. Wall thickness: at least 8 mm. Density: at least 0.8 t/m3. Maximum weight of a single piece: 2 tons. Not accepted: round bars with diameter less than 30 mm, mechanical scrap, speed reducers, steel with high manganese content. ction profiles, shaped profiles, scrap from pipe production. |
270.00 EUR |
3A
Bulky pieces (1200 × 400) >4 mm |
Scrap pieces that can be easily loaded into the melting units. Not accepted: wire and wire products, scrap of non-ferrous metals and alloys, devices and mechanisms. Maximum dimensions: 1500×400 mm. Minimum thickness: 4 mm. Pipes with diameter of 300 mm must be flattened and cut. Must not contain any lubricants or other chemical substances.
|
250.00 EUR |
5A
Large-sized steel >4 mm |
Minimum thickness: 4 mm. Metal structures containing cast iron that are difficult to separate are accepted.
|
225.00 EUR |
12A
Large-sized tin <4 mm |
Maximum thickness: 4.0 mm. Maximum impurities: 2.0 % of the total mass.
|
220.00 EUR |
12AM
Whole cars |
The car must include the engine, radiator, and transmission blocks and units. Must not have any fuel, oil or other technical fluids remaining inside. A hole must be visible at the bottom of the fuel tank. Airbags and safety belt pretensioners must be disabled. Natural gas equipment and the battery must be dismounted.
|
165.00 EUR
|
12M
Light industrial and household scrap. Thickness up to 4 mm |
Accepted: disassembled, unclean car trailers, household appliances with elevated impurity content, as well as metal scrap with non-metal parts that are difficult to separate. Not accepted: steel cables and wires, steel and cast iron shavings.
For household appliances with elevated impurity content, 20% is deducted for the impurities. Fridges and boilers are accepted for free. |
80.00 EUR |
17A
Cast iron (600×500×500) |
Maximum dimensions: 600×500×500 mm.
Maximum weight of a single piece: 2 t. Impurities: not exceeding 1.0% of the total mass. Permissible admixtures of steel that is difficult to separate: not exceeding 5.0% of the total mass. |
250.00 EUR |
20A
Cast iron scrap <4000 kg, bulky pieces |
Pieces with dimensions suitable for handling and transporting. Maximum weight of a single piece: 6 t; maximum thickness: 300 mm. Permissible admixtures of steel that is difficult to separate: not exceeding 15.0% of the total mass.
Maximum amount of non-metal admixtures: not exceeding 2.0 of the total mass. |
225.00 EUR |
16A
Shavings |
Steel shavings obtained from turning and milling.
|
120.00 EUR
|
5AN
Oversized steel scrap |
Oversized steel scrap from pure waste. Clean steel sheet, strip waste. Not rusty, not greasy. Thickness: 6 mm.
|
270.00 EUR
|
12AN
Steel sheets, strips |
Clean steel sheet, strip waste. The maximum geometric dimensions are not specified. Not greasy, without plastic, rubber inserts. Thickness: 4 mm.
|
275.00 EUR
|
12MS
Household appliances |
Refrigerators, washing machines, gas stoves, boilers: may contain non-metallic parts. Not allowed: scrap metal with heavily detachable non-metallic parts that exceed 42% of the total weight
|
55.00 EUR
|
3FeAl Bulky pieces with aluminum |
Bulky pieces with Al 15% Fe 85%. Auto parts, axels etc. |
320.00 EUR |